Western Sydney
Bathroom Renovations Seven Hills
Seven Hills bathrooms are small and solid — a 5m² room in a 60s to 80s brick home, or a townhouse wet area near the station that hasn't been touched since it was built. The fix is almost never more tiles. It's a better layout.
Because the footprint is tight, we draw the room to scale before quoting: vanity width, shower opening, door swing, where the towel rail actually goes. Removing the built-in bath for a 1400mm walk-in shower is the most requested change here. Townhouses are strata-governed, so we lodge the approval before booking trades rather than after.
3–4 weeks on site
Most bathrooms finished in three to four weeks, not months
Certified waterproofing
AS 3740 compliant, so leaks don't come back
Fixed quote
Itemised price before work starts, no surprise extras
Sydney bathrooms, one crew
What a Seven Hills bathroom renovation looks like with us
We've renovated bathrooms across Sydney long enough to know the difference between a 1970s Western Sydney brick home and a new two-storey build in the Hills. Every Seven Hills bathroom renovation is priced off a real on-site measure, waterproofed to AS 3740, and finished by the same team that started it.
- Licensed NSW builder (Lic. 393475C), fully insured
- Waterproofing certified to AS 3740, with photo records at every coat
- Itemised written quote before demolition — every tile, mixer and fitting listed
- One crew, one supervisor, workmanship warranty
More on how we work: bathroom renovations Sydney · our process · all service areas
Seven Hills & surrounds
Seven Hills homes, and what that means for your bathroom
Western Sydney bathrooms fall into two camps: original 70s–90s wet areas that were never properly membraned, and fast-built estate homes with falls that don't quite meet the standard. Around Seven Hills we strip back to the substrate, water-test before tiling, and rebuild the room properly instead of resurfacing over a problem you'd meet again in two years.
Housing around Seven Hills
Modest brick and clad homes from the 60s through 80s on regular blocks, plus townhouse developments near the station.
We also work across Western Sydney
What's in your written quote
We measure your Seven Hills bathroom, work through the layout with you, then put every item in writing — tiles, tapware, waterproofing, rubbish removal. No costs hidden behind a line called "allowances".
Renovating in Seven Hills
What we usually find in Seven Hills bathrooms
The age and build of the house sets the scope long before the tiles do. Here's what we plan for around Seven Hills.
01
Most Seven Hills bathrooms are under 5m², so every millimetre of the vanity and shower footprint is drawn to scale first.
02
Removing the built-in bath in favour of a 1400mm walk-in shower is the most requested change here.
03
Townhouse work is strata-governed; we lodge the approval before we book the trades.
Seven Hills specifics
How a Seven Hills bathroom renovation runs
The parts of the job that are specific to this area, worked out at the measure rather than mid-demolition.
Under 5m², drawn to scale
Wall-hung vanity, concealed cistern and a hobless shower typically claw back 200–300mm of usable floor — the difference between cramped and comfortable.
Bath out, walk-in shower in
Our most common Seven Hills job. Floor rebuilt to fall, membrane to AS 3740, semi-frameless or frameless glass so the room reads wider.
Townhouse strata sorted
We prepare the scope, licences and insurances your owners corporation asks for, and work inside approved noise hours.
Local proof
Bathrooms we've completed near Seven Hills
Small rooms are where detail shows. Every one of these was a compact bathroom rebuilt from the joists up.
180+
Western Sydney bathrooms completed
Often 3 weeks
Small-bathroom builds
Certified to AS 3740
Waterproofing
Walk-In Shower Conversion
A cramped bathroom with a framed shower box, opened up into a hobless walk-in shower with a linear drain, hexagon feature tiling and a round backlit mirror.
3 weeks on site
Frameless Shower Renovation
A compact Blacktown bathroom rebuilt with a frameless glass shower, matte black tapware and a full-height stone-look tile that makes the room feel far bigger.
3 weeks on site
Questions
Common questions from Seven Hills homeowners
Short answers to what people ask before booking a measure.
Usually yes. Wall-hung joinery, a concealed cistern, one large-format tile run and a step-free shower make a 5m² room feel a size up without touching structure.
If there's another bath in the house, no — most clients here take the extra shower space. If it's the only bath and you have young kids, we'll fit a 1500mm slimline instead and shrink the vanity.
We give you the documentation to lodge and work to the approved hours and access rules once it's through. Approval usually runs alongside your tile and tapware selections.
Most land between $19,000 and $28,000 for a full rebuild. Keeping plumbing in place and choosing porcelain over stone is where the savings are.
Yes — Seven Hills is part of our regular run, so our trades and suppliers are already local. No travel surcharge.
Usually within a week. The site measure takes about an hour and you get the quote a few days later.
Three to four weeks. If it's your only bathroom we'll stage the work or sort a temporary option so the household keeps running.
Every job. Done to AS 3740 by a licensed waterproofer, with photos and a compliance certificate handed to you.
Most full renovations land between $22,000 and $38,000. Layout changes and tile choice move the number more than anything else.
NSW Builder Licence #393475C, full insurance, and a workmanship warranty at handover.
Free on-site measure and a written, itemised quote for your Seven Hills bathroom.
How it works
What happens once you say yes?
Three stages and three to four weeks on site. You'll know the price before we start, how long the bathroom is out of use, and who is turning up each morning.
Measure, design and written quote
We measure the room, check the drainage and what's behind the walls, then give you a scaled layout with every fixture listed and a written price that holds once it's signed.
Strip-out, rough-in and waterproofing
Back to frame, licensed plumbing and electrical rough-in, then waterproofing to AS 3740 photographed at every coat. Same crew, same start time, swept down before we leave each day.
Tiling, fit-off and handover
Tiling, glass measured off the finished walls, tapware and joinery installed. Then we walk the room with you, fix anything you pick up, and hand over the certificates and a workmanship warranty.
Free quote
Get a free quote in Seven Hills
Tell us roughly what you're after. We come out to Seven Hills, measure the room, and send back a written quote with every fixture and fitting listed.
- Free on-site measure anywhere in Seven Hills
- A local crew who already work across the Western Sydney
- A written quote with every tile, mixer and fitting listed
- Licensed, insured, fully documented
Answers
More questions from Seven Hills homeowners
We hold a NSW Builder Licence (#393475C) and every trade is licensed and insured. You meet the person running your build at the site measure, not after demolition starts. We also provide a detailed written contract with every item listed before work begins, and a workmanship warranty at handover.
Not if we've measured the site properly. Our quote is a detailed written contract that lists every fixture, tile and fitting by supplier code. If there is a risk we can't see — like asbestos or hidden water damage — we itemise a provisional sum upfront so you know the ceiling before you sign, not after the wall is open.
Most full bathroom renovations in Sydney land between $22,000 and $38,000 for a standard 6–8m² room, with premium and larger builds running $40,000 to $70,000+. The variables that move the number most are whether fixtures stay in place, the tile size and format, whether the room contains asbestos, and the standard of tapware and joinery. We give you a detailed written contract after the site measure so the scope and price are clear before you sign.
A standard full renovation takes three to four weeks on site: demolition and rough-in week one, waterproofing and screed week two, tiling week three, fit-off and finishing week four. We keep the rest of your home live wherever possible, and waterproofing membranes need proper cure time — we don't compress that, because it's the single most common cause of failures we're called in to repair.
Usually no. A like-for-like internal bathroom renovation in NSW is generally exempt development. You will need approval if you are altering the external envelope, changing the building's structure, or the property is heritage listed or in a conservation area. Strata apartments need owners corporation approval regardless. We tell you which category you're in at quote stage.
Waterproofing is carried out by a licensed waterproofer to AS 3740 and you receive a certificate of compliance plus photographic evidence of the membrane before tiling. It's covered by our workmanship warranty. We never allow a tiler to 'roll a bit of membrane on' as part of the tiling day.
No — the room is stripped to the frame. If your home has a second bathroom or powder room we keep it live throughout. Where the renovated room is the only bathroom, we can stage the works or arrange a temporary toilet so the household isn't displaced.
We test suspect materials before demolition rather than discovering them mid-job. If asbestos is present, a licensed removalist handles it and you receive a clearance certificate. Where the quote can't anticipate hidden damage, we itemise a provisional sum upfront so you know the ceiling on that risk before you sign.
Other pages Seven Hills homeowners find useful.
Free quote
Get a free quote for your Seven Hills bathroom
Tell us your suburb and what you're after. We measure up on site and send back a written quote with the price and the timeline set out clearly.